What is a Bathtub Drain? Uses and Types of Bathtub Drains
A bathtub drain system is a mechanism that allows water to flow back into the water system from your shower. The system is built so that water drains through the shower but is discharged at a controlled rate so that the pipe does not overflow or the internal pipeline is not damaged.
What are the uses of drain in bathtub?
The main use of a bathtub drain is to hold the water in the bathtub when necessary and allow the bathtub to be drained again. You will get different kinds of bathtub drain stoppers available at the market.
However, you may not be aware that you need to weigh those factors before selecting different types of bathtub drain stoppers. We have listed some bathtub drain stoppers available in the market with some useful information.
Types of drains found in bathtubs
Lift-and-Turn Bathtub Drain Stopper: In the lift and turn bathtub drain stopper, you can see a small knob, at its cap With this button, you can quickly open or close the stopper by twisting the movements.
Push-and-Pull Drain Stopper: The push-and-pull stopper is very similar to the lift-and-turn stopper in nature and look, but it is pushed down to close and pulled up to open rather than to open and close. Installation is also identical, with the body of the stopper attached to the drain, with the screw underneath the stopper cap.
Toe-Touch Bathtub Drain Stopper: Toe-Touch bathtub is similar to a push and pull drain stopper, and the installation procedure is also similar to that of a push-pull drain stopper, you will get extra spring in the toe-touch bathtub drain.
As its name clearly indicates “Toe- Touch” to open and close, you can simply force the stopper down with your toe. Isn’t that quick and exciting? But as it uses spring at its top to push, you may need to adjust the spring after a while.
Flip-It Bathtub Drain Stopper: It’s the fastest and quickest stopper to use. If you need to open and replace these stoppers, you don’t need any equipment.
It is easy to use this stopper as all you need to do is to move the toggle lever from side to side to open or close it.
Trip Lever Drain Stopper: The Trip Lever Stopper has levers on the overflow plate in front of the bathtub. The Trip-lever drain stopper uses an internal plunger that goes up and down inside the waste-and-over tube to rotate the drain stopper in the opening of the drain.
When the plunger is down, it pushes down the stopper lever and drives the stopper back to an open position. When the plunger is pulled up, it levers the drain stopper down into the closed position.
Pop-Up Drain Stopper: Pop-up Drain stopper is similar to a Trip lever drain as It is operated in the same way as the trip lever model because it features an overflow plate and lever.
The lift of the lever moves the connecting rod in the overflow drain pipe and rotates the rocker arm that is connected to the pop-up stopper. The rear end of the rod contains a spring that lets the rocker arm control the stopper.
There are more other types of drains found in bathtubs, as reported by Marrickville Plumber. If you want to learn more about blocked drains.
