Do you have a wifi dead zone in your house? If yes, then do not panic about this situation. Because the Netgear Range Extender is a better and good choice to eliminate the WiFi dead zone. Because it works with the signal amplifier, which more helps to amplify the standard WI-Fi router’s range. In other words, the dual-core process is also built-in inside the Netgear WiFi extender. This dual-core processor amplifies the Wi-Fi range in each cranny or hook of your smart home. But the question comes, how to improve or boost the range of the router by this extender, so for this, you have to set up. To perform the setup of the Netgear extender, ingeniously plug into a wall outlet and then push the Wi-Fi Protected Setup button.
Besides, the design of the Netgear range extender is unique to the Wi-Fi router. As well, it comes along with a plug-in that literally plugs into a wall outlet sans using the AC power adapter. Moreover, you can also perform the extender setup with a web-based utility. In the web-based setup, you can use mywifiext & quickly complete the setup of this range extender.
Table of Contents
What are the 5 common issues of your Netgear WiFi extender?
We will discuss 5 common issues of Netgear Extender that users face. Due to these issues, the WiFi range of the router does not improve further. Along with this, we will talk about its solution along with these issues. Before understanding the solution, it is important for you to understand the issue.
- Netgear extender not connecting to the router
- Netgear extender login password not working
- The Netgear wifi extender not connecting to the internet
- Netgear W-Fi extender keeps disconnecting
- Wi-Fi network of the extender Netgear extender not showing up
- Netgear extender not turning on
How to fix the common issues of Netgear WiFi extender?
If you want to fix the common issue of the Netgear range extender, you need to follow the below steps.
Change the Wi-Fi channel
If the Netgear extender is unable to detect the 5GHz network of the routers, as we suggest, you can change the Wi-Fi channel. To change the Wi-Fi channel, you need to place the extender in the same room as your main router. Then, you need to login into the web-based interface by mentioning the default IP address. After login into the extender, you will witness the Wireless setting. Under this setting, you need to locate the WI-Fi channel. Afterward, you will be able to change the Wi-Fi channel in the quick way of the extender.
Using network cable to connect the Netgear extender to the router
If the Netgear extender is unable to connect to the router by using the Wi-Fi protected setup button. So we advise, you can use a network cable for the connection. Because through the network cable, you will be able to reliably make a stable connection. Through the network cable, you will quickly make the connection. You will need to connect the LAN port of the router to the LAN port of the Extender via an Ethernet cable. Afterward, you can easily & smoothly enhance the WI-Fi router’s wireless range.
Change the SSID & password
If the Wi-Fi range of the network extender is slow or not showing the network, then the finest option is to change the password & SSID. To change the password and network name(SSID), you need to reach the wireless setting. After reaching this setting, you will notice the password & network name section. Through this option, you will be able to see the password & network. In addition, you will also be able to change this network name(SSID) & password.
Update the firmware of the Netgear extender
To resolve the netgear wifi extender randomly keeps disconnecting errors, we recommend you to verify and update the firmware. To update or verify the firmware version of the Netgear extender, you have to visit the setup wizard. After visiting this wizard, you will see the administration section, click on it. Afterward, you will witness the firmware upgrade section. Under this section, you can simply verify the version. If it is out-of-date, then upgrade it by uploading the latest firmware file.
Reset the Netgear WiFi extender
To reset the Netgear extender, initially, you have to attach it to the wall outlet & push the power button. Then you have to find some object to push the reset button. With the small object, you have to push the reset button. Afterward, the extender will be rebooted & the reset process also finished.
